TS2 Tutorial Videos

How to Assemble TS2?

How to connect air assist?

How to connect WIFI?

How to set parameters?

How to operate APP connection?

How to clean laser head lens

How to join the extension kit?

How to Adjust Y-azis Belt Tightness?

How to Adjust X-azis Belt Tightness?

 

Reference of Materials

 

For engraving

MaterialSpeed(mm/min)PowerTimes
Plywood6000501
Acrylic6000201
Leather6000201
Electroplated coating10001001
Powder coating6000501
Anodic alumina6000201
Stainless steel30001001
Density board6000601
Peddle60001001
Plastic board6000401
Cardboard6000501

 

For Cutting

MaterialSpeed(mm/min)Power (%)Times
Plywood 1mm6001001
Plywood 2mm4501001
Plywood 3mm2801001
Plywood 4mm2001001
Plywood 5mm1501001
Plywood 6mm1001001
Plywood 7-8mm1001001~2
Acrylic 1mm5001001
Acrylic 3mm2001001
Acrylic 6mm1001001~2

Note: 

The energy value is set to 500, and the laser intensity accounts for 50% of the power.

The energy value is set to 1000, and t he proportion of laser intensity to power is 100%. The larger the energy, the faster the speed can be set.

The above parameters only for reference. Due to the different properties properties of the materials. Please adjust the parameter values according to the actual situations.

Contacts

If you can't find a solution, please email us

You can also refer to our Youtube channel for more information!